Skip to Content

ENM-223-R1 Module Configuration

Live config every 1s from device. Edit a field and press Enter to send. While editing, that field won’t auto-update.

Active Modbus Configuration
Address: -- | Baud Rate: --
Serial Log: 

  


  

    
Meter Options

    

      

        
        
      

      

        
        
      

      

        
        
        editing… press Enter to send
      

      

        
        
        editing… press Enter to send
      

    

  


  

    
Calibration (Phase A / B / C)

    

    

      Gains and offsets are 16‑bit (0..65535). Press Enter in a field to send. While editing, live refresh is paused for that field.
    

  


  

    
Alarms (L1, L2, L3, Totals)

    

    

      
    

  


  

    
Relays (2)

    

  


  

    
Live Meter

    

  


  

    
Energies

    

    
Chip-sourced counters. Units: kWh / kvarh / kVAh.

  


  

    
Buttons (4)

    

  


  

    
User LEDs (4)

    

    

      Tip: set a LED source to Override R1 or Override R2 to light when a relay is in button override mode.