Skip to Content
About us

HomeMaster is made by ISYSTEMS AUTOMATION in Ploiești, Romania

HomeMaster® is the in-house brand of ISYSTEMS AUTOMATION S.R.L., an engineering company that has designed, commissioned and maintained control systems for power plants and refineries since 2007. The modules are designed, assembled and tested in our workshop in Ploiești.

  • 2007company founded
  • 2009ISO 9001 certified
  • 20countries with customers
HomeMaster module retail boxes: OpenTherm Gateway, Digital I/O, Analog I/O, Water Leak, MicroPLC and Energy Meter
Central control room with operator consoles and overview displays
Central control room from our industrial references.
Where we come from

From power plants to home panels

ISYSTEMS AUTOMATION develops control systems and optimises processes in power generation, chemical processing and oil refining. Our engineers work on six distributed control system platforms and on safety and burner management systems.

The largest plant we run is a refinery CHP station: three 120 t/h boilers, a 260 t/h circulating fluidised bed boiler at 100 bar, three 12 MW turbines and one of 30 MW. We designed, commissioned and maintained it from 2007 to 2018 and have maintained it again since 2022.

  • Control systems and burner management for boilers and turbines
  • Island-mode operation and frequency and power control
  • Production data, energy accounting and plant performance

Industrial references on isystemsautomation.com

What we brought home

Industrial habits in a house-sized system

HomeMaster uses the same ideas that keep a plant running when one part of it fails.

Logic close to the process

Critical functions run on the module that switches the load. Wall switches, leak shut-off and alarm keep working if the controller, Wi-Fi or Home Assistant is down.

A wired bus in the cabinet

Modules talk RS-485 Modbus RTU: a deterministic wired bus designed for long cable runs and electrically noisy panels.

Open by design

Firmware, schematics and ESPHome packages are published on GitHub. Integration runs through ESPHome and Home Assistant, with no cloud account.

HomeMaster module boards at successive assembly stages
Boards at each assembly stage.
HomeMaster module under a 4.244 kV DC electric strength test
Electric strength test, 4.244 kV DC for 60 s.
HomeMaster MiniPLC controller circuit board
MiniPLC controller board.
HomeMaster modules mounted on a DIN rail
Modules on a DIN rail.
Made in Ploiești

Designed, assembled and tested in our workshop

Eleven HomeMaster modules have been taken through the applicable EU conformity assessment procedures: EMC for all products, LVD, RED and RoHS where applicable. Each product has its own EU Declaration of Conformity.

The first test round did not pass. Four months of engineering followed: stronger isolation in opto-isolators and DC/DC converters, wider creepage and clearance, filtering on every 24 V input and LED output, separate relay and logic supply rails. The second round came back clean.

Electrical safety tests to EN 62368-1 run on our own bench, and every test record names the PCB revision it was performed on.

Compliance and testing in detail

In numbers

HomeMaster today

11modules with an EU Declaration of Conformity
20countries with HomeMaster customers
10countries with a HomeMaster installer
0cloud accounts needed to run the system
Company details

Who you are buying from

CompanyISYSTEMS AUTOMATION S.R.L.
BrandHomeMaster®, EU trade mark 019082911
Registration no.J2007000919293
VATRO21537032
Registered officeStr. Domnișori nr. 81, bl. 62, sc. A, et. 3, ap. 12, 100284 Ploiești, Prahova, Romania
Office and workshopStr. Diligenței 18, 100575 Ploiești, Prahova, Romania
Email[email protected]
Phone+40 747 757 798
Quality managementISO 9001 since 2009
Corporate websiteisystemsautomation.com

Planning a wired smart home?

Pick the modules for your house, or ask us about a project.